ADD YOUR MODS TO THE WELCOME CIRCUIT: BUILD A WELCOME MOD HARNESS
This guide shows how to take an existing mod powered from your Main Mod Fuse Box and safely add it to the Welcome Circuit using an isolated dual-feed harness.
- Category: Electrical Mods
- Author: littlebugg3r
- Section: Isolation Diode Note
- Section: What You're Building
- Section: Normal use
Isolation Diode Note For the small lighting and accessory circuits this guide is aimed at, something around 10A / 100V can be a useful example provided the mod circuit is fused below that current rating. The important rule is: The diode is not powering anything. Its job is to act like a one-way valve, allowing electricity to travel towards the mod while stopping it travelling backwards into the other fuse box. What…